I am workin with Quectel EC25 module.
PS;- This is a 4G module!
My objective being;- Do an HTTP as well as HTTPS post to a remote server.
Here i am using 1,https://requestb.in
I was able to perform HTTP post to ptsv2 site! (unfortunately they only has http support)
So i choose Request bin to do the HTTPS post!
While doing the HTTPS POST i always end up getting the 730 error !
i am attaching a screenshot of the AT commands and its response along with this post
I followed the exact command as given in the Example(Quectel_EC2x&EG9x&EM05_HTTP(S)_AT_Commands_Manual_V1.0), just changed the URL and its Byte !.
still i end up getting the 730 error!(730 error being the invalid Parameter error)
i have been stuck in this issue for a while now!
hope to find a solution from you !
Any kind of help is Appreciated!
I havent worked on Quectel modules so far.
Please share the link to the AT command manual. I will look into it and see if i can find anything out.
Not able to find anything using Quectel_EC2x&EG9x&EM05_HTTP(S)_AT_Commands_Manual_V1.0
Thank you for looking into this.
You can go to the above given link.
and download a zip file, where all the related Docs are present for EC25 module.
Its downloading a large zip file 100MB. Just upload the HTTP AT command manual here.
I was trying to upload the document,
But then the site says, new users cannot upload files!!
Mail me the file to firstname.lastname@example.org
i have sent you a mail!
please check it!
i have the same problem:
HTTPS POST i always end up getting the 730 error !
Have you resolve this problem?