MQTT Connect and publish using M590E module over TCP

Hello Ravi! I have module module neoway m590e. When I open TCP/ IP connection on module: (AT+TCPSETUP=0,34.251.42.52,10098$0D), I send the data (AT+TCPSEND=0,92$0D)> where 0 - use the internal TCP / IP protocol stack, 92 - all characters. which I want send to the brocker. After I recived ‘>’ I write text in hex (102C00064D514973647003C2003C0006414C455849530008716177647A72786D000C36766A6132626C49476D7554$0D)… $0D - end of data transfer, lines. I try publish message to broker. And I did’t see message on the internet(in WEBSOCKET UI). I use program Terminal 1.9b. You put a tick in the cmall windiw"HEX" in Packetize. Terminal 1.9b didn’t have such function. Thank you!

1 Like

Hi Alexis,

For MQTT everything has to be sent in binary/hex,
Use TMFT available here https://www.dropbox.com/s/8bxs3f9i9ouvk7c/tmft_26_customised.rar?dl=0

Or you can use DockLight software also.
Try these and let me know, if it works ok.

Thank you, Ravi for your answer. I try to use TMFT program, which you mentioned in your video. The program can’t full connect to my modem. I didn.t recived answer from modem, and other bug. I turned the speed and another settings for modem, but I have this problem still now. But now, I try Docklight, thank you Ravi, I answer after I try this program)))

1 Like

Hello, I still now have a problem. I use Dockligt. So m590e need, Before sending data to the server, we specify the length of the transmitted characters. After connect to server.
I enterthis command: AT+TCPSEND=0,64. I recieved ‘>’. After, I enter the data
10 2C 00 06 4D 51 49 73 64 70 03 C2 00 3C 00 06 41 4C 45 58 49 53 00 08 71 61 77 64 7A 72 78 6D 00 0C 36 76 6A 61 32 62 6C 49 47 6D 75 54 30 10 00 04 68 6F 6D 65 68 65 6C 6C 6F 20 41 6C 65 78 1A. Where 10 2C 00 06 4D 51 49 73 64 70 03 C2 00 3C 00 06 41 4C 45 58 49 53 00 08 71 61 77 64 7A 72 78 6D 00 0C 36 76 6A 61 32 62 6C 49 47 6D 75 54 - Authentication on cloudmqtt. 30 10 00 04 68 6F 6D 65 68 65 6C 6C 6F 20 41 6C 65 78 - publishing data to topic. So I don’t recieved data on server.Maybe can you to give me some advice. Also I don’t understand why need “1A” in end of message.TMFT not work on my module.

When you enter these bytes, are you entering in HEX mode or ASCII mode?
TMFT not worked means, what exactly happened?

Yes, I switch to hex, when I send data (Authentication + Publish). When I open TMFT I recived the window (PC settings), where I can to turning connection. Ok, I change in accordance with the settings of my module, but I recived the error(Communication: Failed).
(1.PC Settings may not match with Modem Settings
2.Communication port may not be connected properly with modem
3.No power to communication modem
4.May reset modem and then try again).
I make all, but program did’t connect to the module. Docklight work fine.

Dont use the default Scan modem option.
Just set the baud rate and press the Black Terminal button as i do in my videos.
I think you are trying to use Scan modem in TMFT, its for use with Zigbee modules.

Yeah, but I don’t use scan mode. I recieved data from module:
MODEM:STARTUP
.+PBREADY.
I send command, but I didn’t recived answer. Why we send 1A in the end packetize.
I’m wondering why the data does not see the broker, maybe I incorrectly counted the number of syvols and indicated them before sending

0x1A is for SIMCOM modules to indicate it to start sending data, we are done entering it.
It might be some other different character for Neoway.

Thank you Ravi, I use for module end of sending data - $0D

So, does it work now with character changed?

No, I can’t to send data to cloudmqtt. I buy new module sim800l from China. Will be waiting when it come to me.

Maybe problem in count data AT+TCPSEND=0,64. Before sending. Thank you Ravi)

Ok Alexis,
Hope you will have better luck with SIm800L.
Its having better support online compared to Neoway modules.

Yes Ravi, also you have great tutorial on this gsm module. I want to received data to microcontroller and control temperature in my house. Thank you, Ravi you are good man.
See you soon)))
With sincerely Alex Kisel!!!

Thank you Alexis :slight_smile:
Sure, let me know if you need any help. Post a new topic with your queries, will be happy to help.
I have good experience with SIMCOM SIM800 modules. Should be easy.
Stay in touch
Regards,
Ravi

Hello Ravi We should translate the hex packet to the binary format to send with AT+CIPSEND command? For example:
AT+CIPSEND
-> 1000000101100000000000000011001001101010100010100100101110011011001000111000000000011110000100000000000111100000000000000011001000001010000100100001101000100010001010100011000000000000010000110110001101101011011110111000001110010011101000111010101110101000000000000110001111010001110000111000101001010011110100110100101100110001101110110101101101001010110010011000100110000000100110000000000001000011101100110000101101100011001010111010001110010011011110110111001101000011001010110110001101100011011110111001001100001011101100110100100011010